The full FDF Mantis kit has been perfected. All these parts work with any bolt on part offered for the s-chassis but when paired together it is tested and proven to work setup. The arms offer an interference-free design for clearing maximum angle, the knuckles are lighter and offer many improvements in geometry over OEM and even other aftermarket options, and all other components are for complimenting the knuckles and arms. Send us a message for any other questions.
The Mantis Kit for the S-chassis is the most relevant angle kit in today's drift society, and here's why:
Angle, 70 degrees+ depending on your steering rack offset and wheel setup
Tierods the kit includes adjustable offset rack spacers, with inner and outer heim joints.
Ackerman, adjustable ackerman
Roll Center, optimized handling by adding 50mm of roll center correction
Bump steer, minimal bump steer in drift by perfecting tierod pitch angle
Caster, added trail and reduced caster which adds more grip by increasing tire contact patch, causes less bump steer, less jacking from lock to lock, increase transition speed, effortless transition while on the throttle
Camber, optimized camber ranging from -3 to -6
Track Width, 75mm wider per side creating a stable and high clearance front end
Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
Joints, Chromoly heim joints and spherical bearings with self-lubricating nylon race, easily replaceable
Weight Reduction, compact drop knuckle design makes for a lighter and stronger design, scissor frame constructed arms with crumble zone to save mounting points from failing under impact, 7075 aluminum used where possible which is stronger than steel at 40% of the weight.
please allow 3-5 weeks processing for this kit.
Please allow 2-3weeks of fabrication before the item is sent.